{"title":"Strut \u0026 Body Braces","description":"Products in the Strut \u0026amp; Body Braces category","products":[{"product_id":"racingline-vwr81g700-mqb-carbon-fibre-rear-brace","title":"Racingline VWR81G700 MQB Carbon Fibre Rear Brace","description":"\u003cp\u003e\u003cstrong\u003eRacingline VWR81G700 MQB Carbon Fibre Rear Brace ( \u003cspan style=\"color: #ff0000;\"\u003ePLEASE NOTE THIS ITEM WILL BE SPECIAL ORDER EMAIL\/OR CALL US BEFORE ORDERING\u003c\/span\u003e )\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eModern cars like the Golf 7 \u0026amp; 7.5 run a pretty stiff laser-welded bodyshell. Up front, the chassis is very rigid between the suspension tops, but at the rear there is much more chassis flex which negatively affects vehicle handling in hard use, especially with stiff suspension. The new RacingLine Rear Body Brace solves this issue by locking the crucial hard points together.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe RacingLine Rear Body Brace uses solid billet aluminium mounts secured into beautiful, ultra-stiff carbon fibre link bars drastically stiffening the rear of the chassis.\u003c\/li\u003e\n\u003cli\u003eBy reinforcing and tying the rear strut towers together, the brace helps to maintain proper suspension geometry under heavy cornering loads. Remove the bodyshell flex, and the suspension geometry can work as it was designed to do.\u003c\/li\u003e\n\u003cli\u003eDespite the added stiffness, this improved handling performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin.\u003c\/li\u003e\n\u003cli\u003eThe clever design means that installation is simple, using existing body mounting points with no drilling and no removal of trim required, and is completely reversible.\u003c\/li\u003e\n\u003cli\u003eCompatible with rear seats up or down (or removed altogether). The full interior can be maintained even with the installation of the Rear Body Brace.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePRECISION ENGINEERED FOR \u003cspan style=\"color: #ff0000;\"\u003ePERFECT PERFORMANCE\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTop mounts located into rear seat mounts.\u003c\/li\u003e\n\u003cli\u003eAll mounts are CNC 5-axis machined from solid billet.\u003c\/li\u003e\n\u003cli\u003eAerospace-grade T6-6061 Aluminium used throughout.\u003c\/li\u003e\n\u003cli\u003eFEA-developed triangulation design maximises stiffness whilst keeping weight down.\u003c\/li\u003e\n\u003cli\u003e3K twill weave carbon fibre ultra-stiff link bars.\u003c\/li\u003e\n\u003cli\u003eLower mounts lock into cargo tie-downs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLOW PROFILE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThin, low-profile design means minimum impact on boot space and no effect on rear seat operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEASY INSTALL\/REMOVE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClever design means fitting is quick and simple. Completely reversible without trace for removal. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNO DRILLING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNo cutting, no drilling needed. By cleverly re-using the strongest parts of the body, there's no need to modify.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePRACTICAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with rear seats up or down, and we've even added in the luggage tie-downs into the mounting points.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLIGHTWEIGHT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA ruthless approach to weight-saving. Billet aluminium mounting brackets bonded to ultra stiff 3K twill carbon link bars.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eADJUSTABLE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEvery mass-produced car body has small differences in dimensions. The brace is tensioned after fitment for ultra-tight alignment to your car.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWHAT'S IN THE KIT?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4x Mounting brackets\u003c\/li\u003e\n\u003cli\u003e1x Tensioning block \u003c\/li\u003e\n\u003cli\u003e1x Carbon Cross Bar\u003c\/li\u003e\n\u003cli\u003e2x Carbon Brace Bar\u003c\/li\u003e\n\u003cli\u003eAll required fitting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RacingLine","offers":[{"title":"Default Title","offer_id":33011320455301,"sku":"VWR81G700","price":675.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0336\/1020\/3269\/products\/vwr81g700_99834963-dbbb-44ad-a8dc-11d83891cbe7.jpg?v=1585555804"},{"product_id":"racingline-vwr814100-front-upper-brace-frame","title":"Racingline VWR814100 Front Upper Brace Frame","description":"\u003cp\u003e\u003cstrong\u003eRacingline VWR814100 Front Upper Brace Frame ( \u003cspan style=\"color: #ff0000;\"\u003ePLEASE NOTE THIS ITEM WILL BE SPECIAL ORDER EMAIL\/OR CALL US BEFORE ORDERING\u003c\/span\u003e )\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTIGHTEN UP YOUR AUDI'S RESPONSES.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWant to sharpen up your Audi B9€™s handling responses and steering feel? Our beautiful new billet Body Brace replaces the weak factory braces to reinforce the bodyshell for a more precise and pleasurable drive. Modern cars like the B9 Audi run a pretty stiff bodyshell. Load your car hard in the corners though, and the thin, pressed aluminium factory brace won€™t be doing much to prevent chassis flex as the strut towers deflect laterally. The result? Imprecise steering input and a vague, disconnected feeling from the front end. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe RacingLine Body Brace is a stiff, solid billet aluminium replacement which drastically stiffens the front end of the chassis\u003c\/li\u003e\n\u003cli\u003eBy reinforcing and tying the front strut towers together, the brace helps to maintain proper suspension geometry under heavy cornering loads and provides consistent steering response, ensuring a more connected driving experience\u003c\/li\u003e\n\u003cli\u003eDespite the added stiffness, this improved handling performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin\u003c\/li\u003e\n\u003cli\u003eInstallation is simple, and is completely reversible\u003c\/li\u003e\n\u003cli\u003eThe stunning appearance of the RacingLine Body Brace will finish off your engine bay to the standard the B9 deserves.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePRECISION ENGINEERED FOR \u003cspan style=\"color: #ff0000;\"\u003ePERFECT PERFORMANCE\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMeticulously CNC 5-axis engineered from solid billet\u003c\/li\u003e\n\u003cli\u003eFully reversible fitment with no cutting or trimming required\u003c\/li\u003e\n\u003cli\u003eCAD-developed lattice design maximises stiffness whilst keeping weight down\u003c\/li\u003e\n\u003cli\u003eAerospace-grade T6-6061 Aluminium used throughout\u003c\/li\u003e\n\u003cli\u003ePolished, then anodised in liquid titanium silver finish to stay beautiful year after yeay\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RacingLine","offers":[{"title":"Default Title","offer_id":33011320586373,"sku":"VWR814100","price":659.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0336\/1020\/3269\/products\/vwr814100_9368422c-003e-4b83-a79d-1da511eb95bb.jpg?v=1585555797"},{"product_id":"racingline-rear-body-brace-vwr8130s3-sedan","title":"RacingLine Rear Body Brace VWR8130S3-SEDAN","description":"\u003cp\u003eRacingLine Rear Body Brace ( \u003cspan\u003e\u003cem\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eONLY For The 4 Door Sedan Models\u003c\/strong\u003e\u003c\/span\u003e ) Special order\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eModern cars like the Audi 8V A3, S3 and RS3 utilize a fairly stiff laser-welded bodyshell. Up front, the chassis is very rigid between the suspension tops, but at the rear there is much more chassis flex which negatively affects vehicle handling in hard use, especially with stiff suspension. The new RacingLine Rear Body Brace solves this issue by locking the crucial hard points together.\u003c\/p\u003e\n\u003cp\u003eThe RacingLine Rear Body Brace uses solid billet aluminum mounts secured into beautiful, ultra-stiff carbon fibre link bars drastically stiffening the rear of the chassis.\u003c\/p\u003e\n\u003cp\u003eBy reinforcing and tying the rear strut towers together, the brace helps to maintain proper suspension geometry under heavy cornering loads. Remove the bodyshell flex, and the suspension geometry can work as it was designed to do.\u003c\/p\u003e\n\u003cp\u003eDespite the added stiffness, this improved handling performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin.\u003c\/p\u003e\n\u003cp\u003eThe clever design means that installation is simple, using existing body mounting points with no drilling and no removal of trim required, and is completely reversible.\u003c\/p\u003e\n\u003cp\u003eCompatible with rear seats up or down (or removed altogether). The full interior can be maintained even with the installation of the Rear Body Brace.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision Engineered for Perfect Performance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003eTop mounts located into rear seat mounts\u003c\/li\u003e\n\u003cli\u003eAll mounts are CNC 5-axis machined from solid billet\u003c\/li\u003e\n\u003cli\u003eAerospace-grade T6-6061 Aluminum used throughout\u003c\/li\u003e\n\u003cli\u003eFEA-developed triangulation design maximizes stiffness whilst keeping weight down\u003c\/li\u003e\n\u003cli\u003e3K twill weave carbon fibre ultra-stiff link bars\u003c\/li\u003e\n\u003cli\u003eLower mounts lock into cargo tie-downs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RacingLine","offers":[{"title":"Default Title","offer_id":40420891885753,"sku":"VWR8130S3-SEDAN","price":675.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0336\/1020\/3269\/products\/VWR8130S3-SEDAN.jpg?v=1625764173"},{"product_id":"racingline-center-underbody-tunnel-brace-vwr810004","title":"Racingline Center Underbody Tunnel Brace - VWR810004","description":"\u003cp\u003e\u003cstrong\u003eRacingline Center Underbody Tunnel Brace Evo - FWD ONLY MQB Platforms\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eWant to sharpen up the handling responses of your MQB VW or Audi?\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThis intricately designed MQB Billet Underbody Tunnel Braces mount under the body to help fight body flex. This improves rigidity to help refine the handling, whilst also providing valuable extra clearance for larger diameter exhaust systems.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eWHAT DO THEY DO?\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/em\u003eMQB cars rely on thin stamped-steel OE tunnel braces underneath in an attempt to reinforce the body's weaker points and limit chassis flex under demanding loads.\u003c\/p\u003e\n\u003cp\u003eRacingline's new Billet Underbody Braces replaces these weak braces with intricately machined aluminum replacements, greatly improving stiffness, giving much better exhaust clearance and even look great!\u003c\/p\u003e\n\u003cp\u003eCNC Machined from a solid billet of 6061-T6 Aluminum, each brace has been engineered to remove unnecessary material whilst still increasing rigidity.\u003c\/p\u003e\n\u003cp\u003eDespite adding stiffness, this improved dynamic performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin.\u003c\/p\u003e\n\u003cp\u003eThe brace designs mean that installation is simple, using existing body mounting points with no drilling or trim removal required, ensuring fitment is completely reversible.\u003c\/p\u003e","brand":"RacingLine","offers":[{"title":"Default Title","offer_id":42309107843323,"sku":"VWR810004","price":305.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0336\/1020\/3269\/products\/VWR810004.jpg?v=1639320585"},{"product_id":"racingline-rear-underbody-tunnel-brace-vwr810005","title":"Racingline Rear Underbody Tunnel Brace - VWR810005","description":"\u003cp\u003e\u003cstrong\u003eRacingline Rear Underbody Tunnel Brace Evo - FWD \u0026amp; AWD MQB Platforms\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eWant to sharpen up the handling responses of your MQB VW or Audi?\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThis intricately designed MQB Billet Underbody Tunnel Braces mount under the body to help fight body flex. This improves rigidity to help refine the handling, whilst also providing valuable extra clearance for larger diameter exhaust systems.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eWHAT DO THEY DO?\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/em\u003eMQB cars rely on thin stamped-steel OE tunnel braces underneath in an attempt to reinforce the body's weaker points and limit chassis flex under demanding loads.\u003c\/p\u003e\n\u003cp\u003eRacingline's new Billet Underbody Braces replaces these weak braces with intricately machined aluminum replacements, greatly improving stiffness, giving much better exhaust clearance and even look great!\u003c\/p\u003e\n\u003cp\u003eCNC Machined from a solid billet of 6061-T6 Aluminum, each brace has been engineered to remove unnecessary material whilst still increasing rigidity.\u003c\/p\u003e\n\u003cp\u003eWith any 3\" diameter exhaust system, the OE brace gives insufficient clearance. So rather than removing the tunnel brace, Racingline's new Rear Tunnel Brace at last gives you the option to replace it, giving you the clearance you need plus maintaining crucial body stiffness.\u003c\/p\u003e\n\u003cp\u003eDespite adding stiffness, this improved dynamic performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin.\u003c\/p\u003e\n\u003cp\u003eThe brace designs mean that installation is simple, using existing body mounting points with no drilling or trim removal required, ensuring fitment is completely reversible.\u003c\/p\u003e","brand":"RacingLine","offers":[{"title":"Default Title","offer_id":42309166039291,"sku":"VWR810005","price":265.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0336\/1020\/3269\/products\/VWR810005.jpg?v=1639321504"},{"product_id":"racingline-billet-front-subframe-brace-vwr810006","title":"Racingline Billet Front Subframe Brace - VWR810006","description":"\u003cp class=\"product-title product_title entry-title\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eRacingline Front Subframe Brace for MQB\/MQB EVO – VWR810006\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"product-title product_title entry-title\" data-mce-fragment=\"1\"\u003eMQB \u0026amp; MQB ‘evo’ cars rely on either a thin stamped-steel or cast alloy OE front subframe. This subframe has to channel all of the immense forces generating by hard driving.\u003cbr\u003e\u003cbr\u003e​RacingLine’s bolt-in Front Subframe Brace provides much needed support and rigidity to aid accurate handling dynamics.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNot surprisingly, with all of these forces combining in your subframe, significant deflection results, which affects wheel alignment and harms the precision in your steering as it flexes.\u003c\/li\u003e\n\u003cli\u003eRacingLine’s Billet Front Subframe Brace stiffens up the rear of the subframe with an intricately machined aluminium replacement, greatly improving stiffness under load.\u003c\/li\u003e\n\u003cli\u003eDespite adding stiffness, this improved dynamic performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin.\u003c\/li\u003e\n\u003cli\u003eThis is a highly recommended upgrade to protect and enhance your car – whether it’s hard-driven, high-power or used on track.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e","brand":"RacingLine","offers":[{"title":"Default Title","offer_id":42684648063227,"sku":"VWR810006","price":425.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0336\/1020\/3269\/products\/VWR810006.jpg?v=1645106976"},{"product_id":"034-motorsport-billet-aluminum-front-strut-brace-034-603-0018","title":"034 Motorsport Billet Aluminum Front Strut Brace - 034-603-0018","description":"\u003ch3\u003e034 Motorsport Billet Aluminum Front Strut Brace\u003c\/h3\u003e\n\u003cp\u003eThe factory Audi Q5\/SQ5 strut brace is made of thin stamped aluminum, allowing for lateral deflection of the strut towers and chassis flex under hard cornering. This deflection can be observed as imprecise steering input and a vague, disconnected feeling from the front end.\u003cbr\u003e\u003cbr\u003eThe 034Motorsport Strut Brace replaces the flimsy individual factory braces to improve the B9\/B9.5 Q5 \u0026amp; SQ5's steering feel and handling performance. This robust chassis reinforcement is machined from T6-6061 billet aluminum, and engineered to be a comprehensive upgrade by limiting lateral strut tower deflection and maintaining proper suspension geometry under heavy cornering. The incorporated center brace ties together both left and right strut towers to provide precise, consistent feedback from the front end and ensures that you enjoy a more connected and precise driving experience.\u003cbr\u003e\u003cbr\u003eThis strut brace was thoroughly tested by 034Motorsport on an in-house B9 Audi SQ5 Development Vehicle before release. Installation is very simple, can be performed in minutes, and is completely reversible.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered to Enhance Handling Dynamics and Performance\u003c\/li\u003e\n\u003cli\u003eImproves Steering Feel, Consistency, and Precision\u003c\/li\u003e\n\u003cli\u003eBetter Triangulation than Factory Brace\u003c\/li\u003e\n\u003cli\u003eBolt-On Upgrade for Factory Front Strut Braces - Easy, Straightforward Installation!\u003c\/li\u003e\n\u003cli\u003eT6-6061 Billet Aluminum Construction with Clear Anodized Finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWHAT'S INCLUDED:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e034Motorsport Billet Aluminum Front Strut Brace Chassis Reinforcement\u003c\/li\u003e\n\u003cli\u003eM8 Mounting Screws (Set of 4)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guide:\u003c\/strong\u003e \u003ca href=\"https:\/\/store.034motorsport.com\/docs\/034-603-0018_Install_Instructions.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eClick Here!\u003c\/a\u003e\u003c\/p\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":43548450390267,"sku":"034-603-0018","price":852.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0336\/1020\/3269\/products\/034-603-0018.jpg?v=1666446682"},{"product_id":"034-motorsport-x-brace-billet-aluminum-chassis-reinforcement-034-603-0008","title":"034 Motorsport X-Brace Billet Aluminum Chassis Reinforcement - 034-603-0008","description":"\u003ch3\u003e034 Motorsport X-Brace Billet Aluminum Chassis Reinforcement\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eDoes Not Fit Cabriolet Models\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e034Motorsport is proud to offer our Billet Aluminum X-Brace Chassis Reinforcement Upgrade for the B8 \u0026amp; B8.5 Audi A4\/S4\/RS4, A5\/S5\/RS5, Q5\/SQ5, and Allroad! The factory Audi front subframe brace is manufactured from multiple pieces of stamped steel, and allows for performance-hindering chassis flex under load. This torsional flex can result in improper suspension geometry and alignment when cornering, and leads to vague steering feel and lack of steering precision.\u003cbr\u003e\u003cbr\u003eThe 034Motorsport X-Brace is a billet aluminum chassis reinforcement to replace the factory front subframe brace to increase torsional rigidity, resulting in improved steering feel and handling performance. Machined in-house from T6-6061 billet aluminum, the 034Motorsport X-Brace is engineered to outperform the stock welded, stamped steel part and ensure that suspension geometry is not compromised by chassis flex under hard cornering. Weighing in at 8.2 pounds versus 7.8 pounds for the factory stamped steel part, the X-Brace adds significant strength and rigidity with a negligible effect on weight.\u003cbr\u003e\u003cbr\u003eThis chassis brace upgrade was thoroughly tested by 034Motorsport and independent Audi enthusiasts before release. Installation is very simple, can be performed in minutes, and is completely reversible.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eT6-6061 Billet Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eCNC-Machined In-House\u003c\/li\u003e\n\u003cli\u003eClear Anodized Finish for Durability\u003c\/li\u003e\n\u003cli\u003eEngineered to Replace Factory Front Subframe Brace\u003c\/li\u003e\n\u003cli\u003eDrastically Reduces Chassis Flex When Cornering\u003c\/li\u003e\n\u003cli\u003eEnhances Handling Dynamics and Performance\u003c\/li\u003e\n\u003cli\u003eImproves Steering Feel, Consistency, and Precision\u003c\/li\u003e\n\u003cli\u003eWill Not Cause Additional NVH Transfer Inside Cabin\u003c\/li\u003e\n\u003cli\u003eModular Design Fits Both B8 (Pre-Facelift) \u0026amp; B8.5 (Facelift) Models\u003c\/li\u003e\n\u003cli\u003eEasy, Straightforward Installation!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e034Motorsport Billet Aluminum X-Brace Chassis Reinforcement (Fits B8\/B8.5 Audi A4\/S4\/RS4, A5\/S5\/RS5, Q5\/SQ5)\u003c\/li\u003e\n\u003cli\u003eModular X-Brace Inserts (Set of 2)\u003c\/li\u003e\n\u003cli\u003eM10 X-Brace Assembly Screws (Set of 4)\u003c\/li\u003e\n\u003cli\u003eM5 Undercarriage Tray Mounting Screws (Set of 4)\u003c\/li\u003e\n\u003cli\u003e15mm Undercarriage Tray Mounting Washers (Set of 4)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e\u003cbr\u003eFits LHD (Left-Hand-Drive) Vehicles Only. Does Not Fit RHD (Right-Hand-Drive) Vehicles.\u003cbr\u003eDoes Not Fit Cabriolet.\u003cbr\u003eThe X-Brace will fit the Audi RS5, however, due to a variation in the belly pan, it will block some mounting points for the plastic shield.\u003cbr\u003eWe recommend using new factory stretch bolts to install the X-Brace. Complete factory bolt kits are sold separately below.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReplaces:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8T1399345J\u003c\/li\u003e\n\u003cli\u003e8K1399345E\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guide:\u003c\/strong\u003e \u003ca href=\"https:\/\/store.034motorsport.com\/docs\/034-603-0008-Install_Instructions.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003eClick Here!\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":43754066215163,"sku":"034-603-0008","price":1082.88,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0336\/1020\/3269\/products\/034-603-0008.jpg?v=1666463635"},{"product_id":"034-motorsport-billet-aluminum-front-strut-brace-034-603-0010","title":"034 Motorsport Billet Aluminum Front Strut Brace - 034-603-0010","description":"\u003ch3\u003e034 Motorsport Billet Aluminum Front Strut Brace\u003c\/h3\u003e\n\u003cp\u003e034Motorsport is proud to offer our Billet Aluminum Front Strut Brace for the B8 Audi A4\/S4 \u0026amp; Allroad! These Audi models do not come with a strut brace from the factory, allowing for lateral deflection of the strut towers and chassis flex under hard cornering. While the B8 chassis comes from the factory with a support bar located behind the fire wall, this component is not significantly structural to the chassis and allows strut tower deflection. This deflection can be observed as imprecise steering input and a vague, disconnected feeling from the front end due to undesired suspension geometry changes.\u003cbr\u003e\u003cbr\u003eThe 034Motorsport Strut Brace incorporates an extremely rigid billet aluminum center section that attaches to both strut towers and to the firewall in two locations, improving the vehicle's steering feel and handling performance. This robust chassis reinforcement is machined from 6061-T6 billet aluminum, and engineered to be a comprehensive upgrade by limiting lateral strut tower deflection and maintaining proper suspension geometry under heavy cornering. The end result is a significantly more rigid front end that provides precise, consistent feedback through the steering wheel and ensures that you enjoy a more connected driving experience.\u003cbr\u003e\u003cbr\u003eThis strut brace was thoroughly tested by 034Motorsport on in-house B8 and B8.5 Audi S4 Development Vehicles before release.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTruss Design is Lightweight and Extremely Rigid\u003c\/li\u003e\n\u003cli\u003e6061-T6 Billet Aluminum Construction with Clear Anodized Finish\u003c\/li\u003e\n\u003cli\u003eAttaches to Both Strut Towers and the Firewall in Two Locations\u003c\/li\u003e\n\u003cli\u003eEngineered to Enhance Handling Dynamics and Performance\u003c\/li\u003e\n\u003cli\u003eImproves Steering Feel, Consistency, and Precision\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWHAT'S INCLUDED:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e034Motorsport Billet Aluminum Front Strut Brace Chassis Reinforcement\u003c\/li\u003e\n\u003cli\u003eStrut Tower Brackets\u003c\/li\u003e\n\u003cli\u003eStrut Bar Brackets\u003c\/li\u003e\n\u003cli\u003eTransfer Punch\u003c\/li\u003e\n\u003cli\u003eTransfer Punch Guides (4)\u003c\/li\u003e\n\u003cli\u003eMounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guide:\u003c\/strong\u003e \u003ca href=\"https:\/\/store.034motorsport.com\/docs\/034-603-0010-Install_Instructions.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eClick Here!\u003c\/a\u003e\u003c\/p\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":43754194764027,"sku":"034-603-0010","price":797.76,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0336\/1020\/3269\/products\/034-603-0010.jpg?v=1666446523"},{"product_id":"034-motorsport-billet-aluminum-front-strut-brace-034-603-0012","title":"034 Motorsport Billet Aluminum Front Strut Brace - 034-603-0012","description":"\u003ch3\u003e034 Motorsport Billet Aluminum Front Strut Brace\u003c\/h3\u003e\n\u003cp\u003eThe factory Audi strut brace is made of thin stamped aluminum, allowing for lateral deflection of the strut towers and chassis flex under hard cornering. This deflection can be observed as imprecise steering input and a vague, disconnected feeling from the front end. \u003cbr\u003e\u003cbr\u003eThe 034Motorsport Strut Brace replaces the flimsy individual factory braces to improve the B9 A4's steering feel and handling performance. This robust chassis reinforcement is machined from T6-6061 billet aluminum, and engineered to be a comprehensive upgrade by limiting lateral strut tower deflection and maintaining proper suspension geometry under heavy cornering. The incorporated center brace ties together both left and right strut tower to provide precise, consistent feedback from the front end and ensures that you enjoy a more connected driving experience.\u003cbr\u003e\u003cbr\u003eThis strut brace was thoroughly tested by 034Motorsport on an in-house B9 Audi A4 Development Vehicle before release. Installation is very simple, can be performed in minutes, and is completely reversible.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered to Enhance Handling Dynamics and Performance\u003c\/li\u003e\n\u003cli\u003eImproves Steering Feel, Consistency, and Precision\u003c\/li\u003e\n\u003cli\u003eBolt-On Upgrade for Factory Front Strut Braces - Easy, Straightforward Installation!\u003c\/li\u003e\n\u003cli\u003eT6-6061 Billet Aluminum Construction with Clear Anodized Finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e034Motorsport Billet Aluminum Front Strut Brace Chassis Reinforcement\u003c\/li\u003e\n\u003cli\u003eM8 Mounting Screws (Set of 4)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guide:\u003c\/strong\u003e \u003ca href=\"https:\/\/store.034motorsport.com\/docs\/034motorsport-front-strut-brace-b9-audi-a4-034-603-0012-install-guide.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eClick Here!\u003c\/a\u003e\u003c\/p\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":43754280943867,"sku":"034-603-0012","price":741.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0336\/1020\/3269\/products\/034-603-0012.jpg?v=1666446601"},{"product_id":"034-motorsport-front-strut-brace-034-603-0028","title":"034 Motorsport Front Strut Brace - 034-603-0028","description":"\u003ch3\u003e034 Motorsport Front Strut Brace\u003c\/h3\u003e\n\u003cp\u003eThe factory Audi Q5\/SQ5 strut brace is made of thin-walled tube\/stamped aluminum, allowing for lateral deflection of the strut towers and chassis flex under hard cornering. This deflection can be observed as imprecise steering input and a vague, disconnected feeling from the front end.\u003cbr\u003e\u003cbr\u003eThe 034Motorsport Billet Aluminum Front Strut Brace replaces the flimsy individual factory braces to improve the B8\/B8.5 Q5 \u0026amp; SQ5's steering feel and handling performance. This robust chassis reinforcement is machined from T6-6061 billet aluminum, and engineered to be a comprehensive upgrade by limiting lateral strut tower deflection and maintaining proper suspension geometry under heavy cornering. The incorporated center brace ties together both left and right strut towers to provide precise, consistent feedback from the front end and ensures that you enjoy a more connected and precise driving experience.\u003cbr\u003e\u003cbr\u003eThis strut brace was thoroughly tested by 034Motorsport on an in-house B8 Audi Q5 3.0T Development Vehicle before release. Installation is very simple, can be performed in minutes, and is completely reversible.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered to Enhance Handling Dynamics and Performance\u003c\/li\u003e\n\u003cli\u003eImproves Steering Feel, Consistency, and Precision\u003c\/li\u003e\n\u003cli\u003eBetter Triangulation than Factory Brace\u003c\/li\u003e\n\u003cli\u003eBolt-On Upgrade for Factory Front Strut Braces - Easy, Straightforward Installation\u003c\/li\u003e\n\u003cli\u003eT6-6061 Billet Aluminum Construction with Clear Anodized Finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWHAT'S INCLUDED:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e034Motorsport Billet Aluminum Front Strut Brace Chassis Reinforcement\u003c\/li\u003e\n\u003cli\u003eAll Necessary Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOE Part Interchange:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8R0 805 629 E\u003c\/li\u003e\n\u003cli\u003e8R0 805 629 F\u003c\/li\u003e\n\u003cli\u003e8R0 805 629 G\u003c\/li\u003e\n\u003cli\u003e8R0 805 619 A\u003c\/li\u003e\n\u003cli\u003e8R0 805 620 B\u003c\/li\u003e\n\u003cli\u003e8R0 805 620 D\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guide:\u003c\/strong\u003e \u003ca href=\"https:\/\/store.034motorsport.com\/docs\/034-603-0028_Install_Instructions.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eClick Here!\u003c\/a\u003e\u003c\/p\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":43754328916219,"sku":"034-603-0028","price":969.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0336\/1020\/3269\/products\/034-603-0028.jpg?v=1666538784"},{"product_id":"034-motorsport-x-clear-driveshaft-tunnel-brace-034-603-0029","title":"034 Motorsport X-Clear Driveshaft Tunnel Brace - 034-603-0029","description":"\u003ch3\u003e034 Motorsport X-Clear Driveshaft Tunnel Brace\u003c\/h3\u003e\n\u003cp\u003eThe X-Clear Driveshaft Tunnel Brace is designed to increase clearance for aftermarket exhausts by replacing the shallow-fitting OEM tunnel brace. This allows for a larger diameter exhaust to be installed without causing excessive rattling or vibration, while also utilizing an integrated aeroflap to maintain OE underbody aerodynamics.\u003cbr\u003e\u003cbr\u003eThe X-Clear Driveshaft Tunnel Brace replaces the factory brace with a CNC Machined Billet 6061-T6 Aluminum brace designed to increase exhaust clearance by 8mm over factory.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncrease stiffness over OE stamped steel part\u003c\/li\u003e\n\u003cli\u003eCNC Machined from Billet 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eBright black anodizing, with laser etched 034Motorsport logo\u003c\/li\u003e\n\u003cli\u003eAdds 8mm of additional clearance to exhaust compared to the OE part, allowing larger diameter (up to ½” diameter larger) aftermarket exhaust installation\u003c\/li\u003e\n\u003cli\u003eFast, easy installation\u003c\/li\u003e\n\u003cli\u003eNo added NVH\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWHAT’S INCLUDED:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBillet tunnel brace\u003c\/li\u003e\n\u003cli\u003eMounting hardware (Qty. 4 Grade 12.9 M10 socket head screws)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guide:\u003c\/strong\u003e \u003ca href=\"https:\/\/store.034motorsport.com\/docs\/034-603-0029_Install_Instructions.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eClick Here!\u003c\/a\u003e\u003c\/p\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":43755130454267,"sku":"034-603-0029","price":217.44,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0336\/1020\/3269\/products\/034-603-0029.jpg?v=1666463719"},{"product_id":"034-motorsport-x-clear-driveshaft-tunnel-brace-034-603-0030","title":"034 Motorsport X-Clear Driveshaft Tunnel Brace - 034-603-0030","description":"\u003ch3\u003e034 Motorsport X-Clear Driveshaft Tunnel Brace\u003c\/h3\u003e\n\u003cp\u003eThe X-Clear Driveshaft Tunnel Brace is designed to increase clearance for aftermarket exhausts by replacing the shallow-fitting OEM tunnel brace. This allows for a larger diameter exhaust to be installed without causing excessive rattling or vibration, while also utilizing an integrated aeroflap to maintain OE underbody aerodynamics.\u003cbr\u003e\u003cbr\u003eThe X-Clear Driveshaft Tunnel Brace replaces the factory brace with a CNC Machined Billet 6061-T6 Aluminum brace designed to increase exhaust clearance by 5mm over factory.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncrease stiffness over OE stamped steel part\u003c\/li\u003e\n\u003cli\u003eCNC Machined from Billet 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eBright black anodizing, with laser etched 034Motorsport logo\u003c\/li\u003e\n\u003cli\u003e5mm Increased clearance to exhaust compared to the OE part, allowing larger diameter (up to ½” diameter larger)aftermarket exhaust installation\u003c\/li\u003e\n\u003cli\u003eFast, easy installation\u003c\/li\u003e\n\u003cli\u003eNo added NVH\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWHAT’S INCLUDED:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBillet tunnel brace\u003c\/li\u003e\n\u003cli\u003eMounting hardware (Qty. 4 Grade 12.9 M10 socket head screws)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guide:\u003c\/strong\u003e \u003ca href=\"https:\/\/store.034motorsport.com\/docs\/034-603-0030_Install_Instructions.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eClick Here!\u003c\/a\u003e\u003c\/p\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":43755235410171,"sku":"034-603-0030","price":201.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0336\/1020\/3269\/products\/034-603-0030.jpg?v=1666463796"},{"product_id":"neuspeed-upper-strut-tie-bar-front-35-10-74","title":"Neuspeed Upper Strut Tie-Bar Front - 35.10.74","description":"\u003ch3\u003e\u003cstrong\u003eNeuspeed Upper Strut Tie-Bar Front\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eNeuspeed Front Upper Strut Tie-Bar. Connects the left and right side upper strut mounts in your engine compartment to increase chassis rigidity. The result is improved steering response, especially on cars with high-performance wheel \u0026amp; tire packages.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eFits: VR6 2.8L 24V and R32 only.\u003cbr\u003e\u003cbr\u003eSingle 1\" tubular crossbar with a 4-point mounting plate system\u003cbr\u003eGloss black powder coat \u003cbr\u003eDesigned and engineered Camarillo, California. Proudly manufactured in the USA\u003cbr\u003eActual part shown in the photo\u003cbr\u003eIncludes needed mounting hardware\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":44199665533179,"sku":"35.10.74","price":228.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0336\/1020\/3269\/products\/35.10.74.jpg?v=1670793767"},{"product_id":"neuspeed-upper-strut-tie-bar-front-black-35-10-69","title":"Neuspeed Upper Strut Tie-Bar Front Black - 35.10.69","description":"\u003ch3\u003e\u003cstrong\u003eNeuspeed Upper Strut Tie-Bar Front Black\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eNEUSPEED’s Upper Strut Tie-Bar is designed to reinforce the already stellar VAG MQB\/MQBevo chassis. Installation reduces fore and aft, as well as side-to-side chassis flex during spirited driving, which helps to eliminate unwanted geometry\/alignment changes. This results in better steering response and better handling.\u003cbr\u003e\u003cbr\u003eThe crossbar is a one-piece construction machined from solid 6061-T6 Billet Aluminum using our state-of-the-art multi-axis CNC machines.\u003cbr\u003e\u003cbr\u003eWith the help of the latest and greatest 3D scanning technology, we were able to design and engineer this unit outside the cowl cover compartment and inside the engine bay, resulting in a straight-across design for a rigid chassis connection. No odd torsion angles.\u003cbr\u003e\u003cbr\u003eNot only is this something you can feel, but also something you can see! Our engineering team made extra efforts to ensure this was a piece of your car's puzzle that you'll be able to show off!\u003cbr\u003e\u003cbr\u003eThe cross-bar is designed with oval mounting holes to compensate for manufacturing and assembly tolerances. Beyond these tolerances, if your car has been damaged where the strut tower alignment may be off, for more than what our bar can compensate for, then this may not be the solution for you.\u003cbr\u003e\u003cbr\u003eThe job of the strut bar is to brace the strut towers. You don't need pre-load to do this. Simply a very stable, stronghold to transfer load and keep the body solid. Pre-loading is only going to put the towers under unwanted stress all the time. There is more force pulling the opposite tower than forcing outward on the tower under the cornering load. This was confirmed by measuring the actual load on the bar. It should fit snugly and tight on the towers while your car is on level ground.\u003cbr\u003e\u003cbr\u003eThe car sits level and naturally, even during assembly. Pre-loading the bar could affect camber geometry slightly. This kit is recommended to be installed when the car is in its natural, on-ground position.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUnique Design 6061-T6 Billet Aluminum Cross Bar\u003c\/li\u003e\n\u003cli\u003eFormed-Steel, Gusseted Bracket Ends\u003c\/li\u003e\n\u003cli\u003eSecures via Existing Strut Mount Bolts\u003c\/li\u003e\n\u003cli\u003eDurable Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003eGrade 10.9 Hardware Included\u003c\/li\u003e\n\u003cli\u003eDesigned, engineered, and manufactured in CA, USA\u003c\/li\u003e\n\u003cli\u003eNo additional cutting or drilling required for installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":44199765082363,"sku":"35.10.69","price":573.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0336\/1020\/3269\/products\/35.10.69.jpg?v=1670793865"},{"product_id":"neuspeed-upper-strut-tie-bar-front-blue-35-10-69b","title":"Neuspeed Upper Strut Tie-Bar Front Blue - 35.10.69B","description":"\u003ch3\u003e\u003cstrong\u003eNeuspeed Upper Strut Tie-Bar Front Blue\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eNEUSPEED’s Upper Strut Tie-Bar is designed to reinforce the already stellar VAG MQB\/MQBevo chassis. Installation reduces fore and aft, as well as side-to-side chassis flex during spirited driving, which helps to eliminate unwanted geometry\/alignment changes. This results in better steering response and better handling.\u003cbr\u003e\u003cbr\u003eThe crossbar is a one-piece construction machined from solid 6061-T6 Billet Aluminum using our state-of-the-art multi-axis CNC machines.\u003cbr\u003e\u003cbr\u003eWith the help of the latest and greatest 3D scanning technology, we were able to design and engineer this unit outside the cowl cover compartment and inside the engine bay, resulting in a straight-across design for a rigid chassis connection. No odd torsion angles.\u003cbr\u003e\u003cbr\u003eNot only is this something you can feel, but also something you can see! Our engineering team made extra efforts to ensure this was a piece of your car's puzzle that you'll be able to show off!\u003cbr\u003e\u003cbr\u003eThe cross-bar is designed with oval mounting holes to compensate for manufacturing and assembly tolerances. Beyond these tolerances, if your car has been damaged where the strut tower alignment may be off, for more than what our bar can compensate for, then this may not be the solution for you.\u003cbr\u003e\u003cbr\u003eThe job of the strut bar is to brace the strut towers. You don't need pre-load to do this. Simply a very stable, stronghold to transfer load and keep the body solid. Pre-loading is only going to put the towers under unwanted stress all the time. There is more force pulling the opposite tower than forcing outward on the tower under the cornering load. This was confirmed by measuring the actual load on the bar. It should fit snugly and tight on the towers while your car is on level ground.\u003cbr\u003e\u003cbr\u003eThe car sits level and naturally, even during assembly. Pre-loading the bar could affect camber geometry slightly. This kit is recommended to be installed when the car is in its natural, on-ground position.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUnique Design 6061-T6 Billet Aluminum Cross Bar\u003c\/li\u003e\n\u003cli\u003eFormed-Steel, Gusseted Bracket Ends\u003c\/li\u003e\n\u003cli\u003eSecures via Existing Strut Mount Bolts\u003c\/li\u003e\n\u003cli\u003eDurable Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003eGrade 10.9 Hardware Included\u003c\/li\u003e\n\u003cli\u003eDesigned, engineered, and manufactured in CA, USA\u003c\/li\u003e\n\u003cli\u003eNo additional cutting or drilling required for installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":44199766491387,"sku":"35.10.69B","price":573.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0336\/1020\/3269\/products\/35.10.69B.jpg?v=1670793936"},{"product_id":"neuspeed-upper-strut-tie-bar-front-red-35-10-69r","title":"Neuspeed Upper Strut Tie-Bar Front Red - 35.10.69R","description":"\u003ch3\u003e\u003cstrong\u003eNeuspeed Upper Strut Tie-Bar Front Red\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eNEUSPEED’s Upper Strut Tie-Bar is designed to reinforce the already stellar VAG MQB\/MQBevo chassis. Installation reduces fore and aft, as well as side-to-side chassis flex during spirited driving, which helps to eliminate unwanted geometry\/alignment changes. This results in better steering response and better handling.\u003cbr\u003e\u003cbr\u003eThe crossbar is a one-piece construction machined from solid 6061-T6 Billet Aluminum using our state-of-the-art multi-axis CNC machines.\u003cbr\u003e\u003cbr\u003eWith the help of the latest and greatest 3D scanning technology, we were able to design and engineer this unit outside the cowl cover compartment and inside the engine bay, resulting in a straight-across design for a rigid chassis connection. No odd torsion angles.\u003cbr\u003e\u003cbr\u003eNot only is this something you can feel, but also something you can see! Our engineering team made extra efforts to ensure this was a piece of your car's puzzle that you'll be able to show off!\u003cbr\u003e\u003cbr\u003eThe cross-bar is designed with oval mounting holes to compensate for manufacturing and assembly tolerances. Beyond these tolerances, if your car has been damaged where the strut tower alignment may be off, for more than what our bar can compensate for, then this may not be the solution for you.\u003cbr\u003e\u003cbr\u003eThe job of the strut bar is to brace the strut towers. You don't need pre-load to do this. Simply a very stable, stronghold to transfer load and keep the body solid. Pre-loading is only going to put the towers under unwanted stress all the time. There is more force pulling the opposite tower than forcing outward on the tower under the cornering load. This was confirmed by measuring the actual load on the bar. It should fit snugly and tight on the towers while your car is on level ground.\u003cbr\u003e\u003cbr\u003eThe car sits level and naturally, even during assembly. Pre-loading the bar could affect camber geometry slightly. This kit is recommended to be installed when the car is in its natural, on-ground position.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUnique Design 6061-T6 Billet Aluminum Cross Bar\u003c\/li\u003e\n\u003cli\u003eFormed-Steel, Gusseted Bracket Ends\u003c\/li\u003e\n\u003cli\u003eSecures via Existing Strut Mount Bolts\u003c\/li\u003e\n\u003cli\u003eDurable Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003eGrade 10.9 Hardware Included\u003c\/li\u003e\n\u003cli\u003eDesigned, engineered, and manufactured in CA, USA\u003c\/li\u003e\n\u003cli\u003eNo additional cutting or drilling required for installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":44199767572731,"sku":"35.10.69R","price":573.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0336\/1020\/3269\/products\/35.10.69R.jpg?v=1670794017"},{"product_id":"neuspeed-upper-strut-tie-bar-front-35-10-72","title":"Neuspeed Upper Strut Tie-Bar Front - 35.10.72","description":"\u003ch3\u003eNeuspeed Upper Strut Tie-Bar Front\u003c\/h3\u003e\n\u003cp\u003eNeuspeed Front Upper Strut Tie-Bar. Connects the left and right side upper strut mounts in your engine compartment to increase chassis rigidity. The result is improved steering response, especially on cars with high-performance wheel \u0026amp; tire packages.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits: Golf IV and Jetta IV 1.8T, 2.0L 8V and 2.8L 12V VR6, except 24-valve VR6 vehicles. TDI requires a water separator to be lowered to clear Tie-Bar.\u003c\/li\u003e\n\u003cli\u003eSingle 1\" tubular crossbar with a 4-point mounting plate system.\u003c\/li\u003e\n\u003cli\u003eGloss black powder coat\u003c\/li\u003e\n\u003cli\u003eIncludes needed mounting hardware\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered Camarillo, California. Proudly manufactured in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003c\/h3\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":44199777698043,"sku":"35.10.72","price":228.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0336\/1020\/3269\/products\/35.10.72.jpg?v=1670793694"},{"product_id":"cts-turbo-strut-brace-cts-hw-504","title":"CTS Turbo Strut Brace - CTS-HW-504","description":"\u003ch3\u003e\u003cstrong\u003eCTS Turbo Strut Brace\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eCTS Turbo is proud to announce our billet strut brace for Audi ALLROAD\/A4\/A5\/S4\/S5\/RS4\/RS5.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp\u003eThese braces are used to increase front end stiffness but adding a cross-bar. This will improve turn-in response and overall vehicle handling.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eDesigned to use factory mounting holes, these strut braces bolt-up in minutes.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eMachined from solid aluminum, the CTS Turbo strut brace not only performs great but also looks great.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachined from a solid block of billet aluminum.\u003c\/li\u003e\n\u003cli\u003eImproved turn-in response and handling\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on replacement, no drilling required. Hardware included.\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Canada.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CTS Turbo","offers":[{"title":"Default Title","offer_id":44304378790139,"sku":"CTS-HW-504","price":342.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0336\/1020\/3269\/products\/CTS-HW-504.jpg?v=1673472860"},{"product_id":"034-motorsport-x-clear-driveshaft-tunnel-brace-034-603-0032","title":"034 Motorsport X-Clear Driveshaft Tunnel Brace - 034-603-0032","description":"\u003ch3\u003e\u003cstrong\u003e034 Motorsport X-Clear Driveshaft Tunnel Brace AWD Volkswagen \u0026amp; Audi\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe X-Clear Driveshaft Tunnel Brace is designed to increase clearance for aftermarket exhausts by replacing the shallow-fitting OEM tunnel brace. This allows for a larger diameter exhaust to be installed without causing excessive rattling or vibration.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe X-Clear Driveshaft Tunnel Brace replaces the factory brace with a CNC Machined Billet 6061-T6 Aluminum brace designed to increase exhaust clearance by 8mm over factory.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased Stiffness Over OE Stamped Steel Part\u003c\/li\u003e\n\u003cli\u003eCNC Machined from Billet 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eBright Black Anodizing, with Laser Etched 034Motorsport Logo\u003c\/li\u003e\n\u003cli\u003eAdds 8mm of Additional Clearance to Exhaust Compared to the OE Part, Allowing Larger Diameter (up to ½” diameter larger) Aftermarket Exhaust Installation\u003c\/li\u003e\n\u003cli\u003eFast, Easy Installation\u003c\/li\u003e\n\u003cli\u003eNo Added NVH\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWHAT’S INCLUDED:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBillet Tunnel Brace\u003c\/li\u003e\n\u003cli\u003eMounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eОЕМ NUMBER\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eOEM reference number(s) comparable with the original spare part number:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable width=\"375\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"96\"\u003e5Q0802128\u003c\/td\u003e\n\u003ctd width=\"95\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003ctd width=\"95\"\u003e\u003c\/td\u003e\n\u003ctd width=\"89\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":44307382894843,"sku":"034-603-0032","price":210.24,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0336\/1020\/3269\/products\/034-603-0032.jpg?v=1673558786"},{"product_id":"034-motorsport-x-clear-driveshaft-tunnel-brace-034-603-0033","title":"034 Motorsport X-Clear Driveshaft Tunnel Brace - 034-603-0033","description":"\u003ch3\u003e\u003cstrong\u003e034 Motorsport X-Clear Driveshaft Tunnel Brace FWD Volkswagen \u0026amp; Audi MQB And MQB EVO \u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e( FWD Vehicles Only )\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe X-Clear Driveshaft Tunnel Brace is designed to increase clearance for aftermarket exhausts by replacing the shallow-fitting OEM tunnel brace. This allows for a larger diameter exhaust to be installed without causing excessive rattling or vibration.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe X-Clear Driveshaft Tunnel Brace replaces the factory brace with a CNC Machined Billet 6061-T6 Aluminum brace designed to increase exhaust clearance by 8mm over factory.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased Stiffness Over OE Stamped Steel Part\u003c\/li\u003e\n\u003cli\u003eCNC Machined from Billet 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eBright Black Anodizing, with Laser Etched 034Motorsport Logo\u003c\/li\u003e\n\u003cli\u003eAdds 8mm of Additional Clearance to Exhaust Compared to the OE Part, Allowing Larger Diameter (up to ½” diameter larger) Aftermarket Exhaust Installation\u003c\/li\u003e\n\u003cli\u003eFast, Easy Installation\u003c\/li\u003e\n\u003cli\u003eNo Added NVH\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWHAT’S INCLUDED:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBillet Tunnel Brace\u003c\/li\u003e\n\u003cli\u003eMounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eОЕМ NUMBER\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eOEM reference number(s) comparable with the original spare part number:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable width=\"375\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"96\"\u003e5Q0804421B\u003c\/td\u003e\n\u003ctd width=\"95\"\u003e5Q0802128\u003c\/td\u003e\n\u003ctd width=\"95\"\u003e\u003c\/td\u003e\n\u003ctd width=\"89\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":44307392856315,"sku":"034-603-0033","price":419.04,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0336\/1020\/3269\/products\/034-603-0033.jpg?v=1673559369"},{"product_id":"034-motorsport-handling-packages-stage-3-034-4zz-0017","title":"034 Motorsport Handling Packages Stage 3 - 034-4ZZ-0017","description":"\u003ch3\u003e\u003cstrong\u003e034 Motorsport Handling Packages Stage 3\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e034Motorsport Handling Packages contain staged upgrade packages specifically tailored for the B9\/B9.5 Audi A4 or Allroad 2.0 TFSI. The 034Motorsport Handling Packages contain hand-selected products from the expansive 034Motorsport catalog, put together by the experienced 034Motorsport Engineering Team, to offer staged handling upgrades to best optimize the handling performance of the 2.0 TFSI powered Audi A4 \u0026amp; Allroad!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSTAGE 3 HANDLING PACKAGE CONTENTS:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic+ Lowering Springs\u003c\/li\u003e\n\u003cli\u003eDensity Line Upper Adjustable Control Arms, Track Spec\u003c\/li\u003e\n\u003cli\u003e034Motorsport Front Strut Brace, Billet Aluminum\u003c\/li\u003e\n\u003cli\u003e034Motorsport Dynamic+ Sway Bar Kit\u003c\/li\u003e\n\u003cli\u003eDynamic+ Billet Adjustable Rear Sway Bar End Links\u003c\/li\u003e\n\u003cli\u003eDynamic+ Billet Adjustable Front Sway Bar End Links\u003c\/li\u003e\n\u003cli\u003e034Motorsport Transmission Mount Insert\u003c\/li\u003e\n\u003cli\u003eStreet Density Transmission Mount Upgrade\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Rear Differential Mount Insert Kit\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Rear Subframe Mount Insert Kit\u003c\/li\u003e\n\u003cli\u003eX-Clear Driveshaft Tunnel Brace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePACKAGE FEATURES:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDeveloped In-House by 034Motorsport's Engineering Team\u003c\/li\u003e\n\u003cli\u003eSignificantly Improved Handling Performance \u0026amp; Chassis Dynamics\u003c\/li\u003e\n\u003cli\u003eReduced Bushing Deflection to Maintain Suspension Geometry Under Load\u003c\/li\u003e\n\u003cli\u003eReduced Body Roll \u0026amp; Understeer\u003c\/li\u003e\n\u003cli\u003eSuperb Comfort \u0026amp; Ride Quality\u003c\/li\u003e\n\u003cli\u003eImproved Steering Feel, Consistency, and Precision\u003c\/li\u003e\n\u003cli\u003eDrastically Reduced Transmission and Drivetrain Movement\u003c\/li\u003e\n\u003cli\u003eDirect Bolt-On Upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":44312671813883,"sku":"034-4ZZ-0017-DSO","price":4487.04,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0336\/1020\/3269\/products\/034-4ZZ-0017.jpg?v=1673798611"},{"product_id":"034-motorsport-x-clear-driveshaft-tunnel-brace-034-603-0038","title":"034 Motorsport X-Clear Driveshaft Tunnel Brace - 034-603-0038","description":"\u003ch3\u003e\u003cstrong\u003e034 Motorsport X-Clear Driveshaft Tunnel Brace\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe X-Clear Driveshaft Tunnel Brace is designed to increase clearance for aftermarket exhausts by replacing the shallow-fitting OEM tunnel brace. This allows for a larger diameter exhaust to be installed without causing excessive rattling or vibration.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncrease Stiffness Over OE Stamped Steel Part\u003c\/li\u003e\n\u003cli\u003eCNC Machined from Billet 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eBright Black Anodizing, with Laser Etched 034Motorsport Logo\u003c\/li\u003e\n\u003cli\u003eAdds 16mm of Additional Clearance to Exhaust Compared to the OE part, Allowing Larger Diameter (Up To 1” Diameter Larger) Aftermarket Exhaust Installation\u003c\/li\u003e\n\u003cli\u003eFast, Easy Installation\u003c\/li\u003e\n\u003cli\u003eNo added NVH\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOE PART INTERCHANGE:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4G0803183A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWHAT'S INCLUDED:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBillet Tunnel Brace\u003c\/li\u003e\n\u003cli\u003eMisc Hardware (For Underbody Shielding)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guide:\u003c\/strong\u003e\u003ca href=\"https:\/\/www.034motorsport.com\/docs\/034-603-0038_Install_Instructions.pdf\"\u003e\u003cspan\u003e \u003c\/span\u003eClick Here!\u003c\/a\u003e\u003c\/p\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":44726387376379,"sku":"034-603-0038","price":277.92,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0336\/1020\/3269\/files\/034-603-0038.jpg?v=1690495456"}],"url":"https:\/\/strictlyeuropeanmotors.com\/collections\/strut-body-braces.oembed","provider":"Strictly European Motors","version":"1.0","type":"link"}