Strictly European Motors
Photos may not represent actual product received, and are for illustration purposes only

Unitronic ECU And TCU Performance Software For FWD 1.8 TSI GEN3 MQB

UNIA3FWD
Free Shipping Canada Wide Only!
Free Shipping Flag of Canada
Ships in 1-2 Business Days
Flag of Canada $650.00

UniConnect+ Cable is REQUIRED to Flash Unitronic Software!

NOTE: UniConnect Cables are ONLY assigned to ONE car. Cables are non-transferrable and non-refundable.

Unitronic ECU And TCU Performance Software A3 FWD TSI GEN3 MQB

Description

Performance Software Precisely Engineered for a completely stock car.
Subject to ECU box code availability.

Features ( ECU Stage 1 )

Engineered with Strict Industry Standards:
With over 10 years of experience in Bosch and Siemens engine management calibration, Unitronic is able to utilized its industry leading tools and equipment to assure an optimal calibration; delivering maximum performance, while maintaining complete OEM-like reliability and drivability.

Extensively Tested Under Various Driving Conditions:
Development begins using its in-house engine dyno housed in an environmentally controlled cell; closely monitoring a plethora of operational data, utilizing industry leading calibration tools and resources. Additional validation and results comparison are completed using its in-house Maha Chassis dyno as a second step of product development. Beta calibrations are then tested in race and street scenarios, using multiple cars throughout the world under various driving conditions. This engine calibration strategy ensures Unitronic Performance Software delivers maximum performance, OEM-like drivability and reliability anywhere in the world. Unitronic Performance Software is only released to its Clients once development is thoroughly completed in accordance to Unitronic’s strict standards.

Factory Safety Limiters Retained:
OEM “fail safes” are retained within the ECU calibration. Close monitoring of all operation parameters ensures that engine operation stays within factory components limits, resulting in an OEM-like drivability and reliability.

Engine Temperature Protection (Rev Limit based on Engine Coolant Temperature):
Engine speed limit protection active under warm-up to prevent potential damage when coolant temperature is not within operation range.

Optimized Responsiveness and Drivability:
Professionally calibrated to improve engine response and reduce drive-by-wire lag. Optimized torque curve for more low end torque and faster turbo spool.

Optimized Smoothness and Driving Comfort:
Due to the large flat torque curve, the calibration offers a smooth operation under normal and hard acceleration. This results in linear acceleration with constant torque without low end torque peak that will cause loss of traction and uncontrollable power surge, at the expense of high engine speed power.

Optimized Maximum Output:
Unitronic development team delivers the maximum power output while staying within the operational limits of the factory components used. Specifically, this results in the highest engine performance without sacrificing the reliability of the engine, turbocharger, or other engine components.

Power Delivery Perfectly Optimized Throughout the Power Band:
Aligned with the OEM strategy, the calibration is designed to offer a large flat torque plateau to provide a smooth and linear power band. Maximum torque output is achieved sooner and maintained longer which creates a broader torque plateau and greater area under the curve. This results in an improved acceleration and optimal engine operation.

Improved Fuel Efficiency:
Optimized timing and injection under cruising condition for an improved fuel efficiency.

Speed Governor Removed:
Vehicle speed limiter within ECU is removed. (If automatic, subject to transmission rotational speed limit)

Recommended Hardware

  • Carbon Fiber Intake System With Air Duct For 1.8/2.0 TSI Gen3 MQB 

Description

Performance Software Precisely Engineered for a completely stock car.
Subject to ECU box code availability.

Features ( ECU Stage 1+ )

Engineered with Strict Industry Standards:
With over 10 years of experience in Bosch and Siemens engine management calibration, Unitronic is able to utilized its industry leading tools and equipment to assure an optimal calibration; delivering maximum performance, while maintaining complete OEM-like reliability and drivability.

Extensively Tested Under Various Driving Conditions:
Development begins using its in-house engine dyno housed in an environmentally controlled cell; closely monitoring a plethora of operational data, utilizing industry leading calibration tools and resources. Additional validation and results comparison are completed using its in-house Maha Chassis dyno as a second step of product development. Beta calibrations are then tested in race and street scenarios, using multiple cars throughout the world under various driving conditions. This engine calibration strategy ensures Unitronic Performance Software delivers maximum performance, OEM-like drivability and reliability anywhere in the world. Unitronic Performance Software is only released to its Clients once development is thoroughly completed in accordance to Unitronic’s strict standards.

Factory Safety Limiters Retained:
OEM “fail safes” are retained within the ECU calibration. Close monitoring of all operation parameters ensures that engine operation stays within factory components limits, resulting in an OEM-like drivability and reliability.

Engine Temperature Protection (Rev Limit based on Engine Coolant Temperature):
Engine speed limit protection active under warm-up to prevent potential damage when coolant temperature is not within operation range.

Optimized Responsiveness and Drivability:
Professionally calibrated to improve engine response and reduce drive-by-wire lag. Optimized torque curve for more low end torque and faster turbo spool.

Optimized Smoothness and Driving Comfort:
Due to the large flat torque curve, the calibration offers a smooth operation under normal and hard acceleration. This results in linear acceleration with constant torque without low end torque peak that will cause loss of traction and uncontrollable power surge, at the expense of high engine speed power.

Optimized Maximum Output:
Unitronic development team delivers the maximum power output while staying within the operational limits of the factory components used. Specifically, this results in the highest engine performance without sacrificing the reliability of the engine, turbocharger, or other engine components.

Power Delivery Perfectly Optimized Throughout the Power Band:
Aligned with the OEM strategy, the calibration is designed to offer a large flat torque plateau to provide a smooth and linear power band. Maximum torque output is achieved sooner and maintained longer which creates a broader torque plateau and greater area under the curve. This results in an improved acceleration and optimal engine operation.

Improved Fuel Efficiency:
Optimized timing and injection under cruising condition for an improved fuel efficiency.

Speed Governor Removed:
Vehicle speed limiter within ECU is removed. (If automatic, subject to transmission rotational speed limit)

Ignition Timing Precisely Calibrated for Higher Octane Fuel:
Engine calibration optimized to take advantage of higher fuel quality to extract maximum energy from the combustion. Therefore, when using a higher octane fuel, more power and better fuel efficiency will be achieved.

Full Staged Software Suite
Includes all Stage 1+ tune variants and all lower software stages as well.

Recommended Hardware

  • Carbon Fiber Intake System With Air Duct For 1.8/2.0 TSI Gen3 MQB

Description

Performance Software Precisely Engineered for use with an upgraded exhaust system.
Subject to ECU box code availability.

Features ( ECU Stage 2 )

Engineered with Strict Industry Standards:
With over 10 years of experience in Bosch and Siemens engine management calibration, Unitronic is able to utilized its industry leading tools and equipment to assure an optimal calibration; delivering maximum performance, while maintaining complete OEM-like reliability and drivability.

Extensively Tested Under Various Driving Conditions:
Development begins using its in-house engine dyno housed in an environmentally controlled cell; closely monitoring a plethora of operational data, utilizing industry leading calibration tools and resources. Additional validation and results comparison are completed using its in-house Maha Chassis dyno as a second step of product development. Beta calibrations are then tested in race and street scenarios, using multiple cars throughout the world under various driving conditions. This engine calibration strategy ensures Unitronic Performance Software delivers maximum performance, OEM-like drivability and reliability anywhere in the world. Unitronic Performance Software is only released to its Clients once development is thoroughly completed in accordance to Unitronic’s strict standards.

Factory Safety Limiters Retained:
OEM “fail safes” are retained within the ECU calibration. Close monitoring of all operation parameters ensures that engine operation stays within factory components limits, resulting in an OEM-like drivability and reliability.

Engine Temperature Protection (Rev Limit based on Engine Coolant Temperature):
Engine speed limit protection active under warm-up to prevent potential damage when coolant temperature is not within operation range.

Optimized Responsiveness and Drivability:
Professionally calibrated to improve engine response and reduce drive-by-wire lag. Optimized torque curve for more low end torque and faster turbo spool.

Optimized Smoothness and Driving Comfort:
Due to the large flat torque curve, the calibration offers a smooth operation under normal and hard acceleration. This results in linear acceleration with constant torque without low end torque peak that will cause loss of traction and uncontrollable power surge, at the expense of high engine speed power.

Optimized Maximum Output:
Unitronic development team delivers the maximum power output while staying within the operational limits of the factory components used. Specifically, this results in the highest engine performance without sacrificing the reliability of the engine, turbocharger, or other engine components.

Power Delivery Perfectly Optimized Throughout the Power Band:
Aligned with the OEM strategy, the calibration is designed to offer a large flat torque plateau to provide a smooth and linear power band. Maximum torque output is achieved sooner and maintained longer which creates a broader torque plateau and greater area under the curve. This results in an improved acceleration and optimal engine operation.

Improved Fuel Efficiency:
Optimized timing and injection under cruising condition for an improved fuel efficiency.

Speed Governor Removed:
Vehicle speed limiter within ECU is removed. (If automatic, subject to transmission rotational speed limit)

Ignition Timing Precisely Calibrated for Higher Octane Fuel:
Engine calibration optimized to take advantage of higher fuel quality to extract maximum energy from the combustion. Therefore, when using a higher octane fuel, more power and better fuel efficiency will be achieved.

Stage 2 Optimized Low End Torque:
Unitronic’s Stage 2 Performance Software Calibration offers an improved low end torque curve over Stage 1+ due to back pressure relief from Unitronic’s Performance Downpipe. Power peak increase is minimal due to turbo maximum efficiency already reached with previous stages.

Full Staged Software Suite
Includes all Stage 2 tune variants and all lower software stages as well. *Does not include Unitronic Stage 2 IS20 software.

Required Hardware

  • Unitronic Performance Downpipe 1.8 TSI MQB EA888.3 AWD
  • Unitronic Performance Downpipe 1.8 TSI MQB EA888.3 FWD

Recommended Hardware

  • Carbon Fiber Intake System With Air Duct For 1.8/2.0 TSI Gen3 MQB
  • Charge Pipe Upgrade Kit For MQB
  • Intercooler Upgrade Kit for 1.8 and 2.0 TSI Gen3 MQB and 8Y S3 by Unitronic
  • MQB Turbo Inlet Elbow

    Description

    Performance Software Precisely Engineered for use with IS20 (GTI/A3 2.0 TSI) Turbocharger Upgrade for the 1.8 TSI Gen3 MQB.
    Subject to ECU Box code availability.

    Features ( ECU Stage 2 IS20 )

    Engineered with Strict Industry Standards:
    With over 10 years of experience in Bosch and Siemens engine management calibration, Unitronic is able to utilized its industry leading tools and equipment to assure an optimal calibration; delivering maximum performance, while maintaining complete OEM-like reliability and drivability.

    Extensively Tested Under Various Driving Conditions:
    Development begins using its in-house engine dyno housed in an environmentally controlled cell; closely monitoring a plethora of operational data, utilizing industry leading calibration tools and resources. Additional validation and results comparison are completed using its in-house Maha Chassis dyno as a second step of product development. Beta calibrations are then tested in race and street scenarios, using multiple cars throughout the world under various driving conditions. This engine calibration strategy ensures Unitronic Performance Software delivers maximum performance, OEM-like drivability and reliability anywhere in the world. Unitronic Performance Software is only released to its Clients once development is thoroughly completed in accordance to Unitronic’s strict standards.

    Factory Safety Limiters Retained:
    OEM “fail safes” are retained within the ECU calibration. Close monitoring of all operation parameters ensures that engine operation stays within factory components limits, resulting in an OEM-like drivability and reliability.

    Engine Temperature Protection (Rev Limit based on Engine Coolant Temperature):
    Engine speed limit protection active under warm-up to prevent potential damage when coolant temperature is not within operation range.

    Optimized Responsiveness and Drivability:
    Professionally calibrated to improve engine response and reduce drive-by-wire lag. Optimized torque curve for more low end torque and faster turbo spool.

    Optimized Smoothness and Driving Comfort:
    Due to the large flat torque curve, the calibration offers a smooth operation under normal and hard acceleration. This results in linear acceleration with constant torque without low end torque peak that will cause loss of traction and uncontrollable power surge, at the expense of high engine speed power.

    Optimized Maximum Output:
    Unitronic development team delivers the maximum power output while staying within the operational limits of the factory components used. Specifically, this results in the highest engine performance without sacrificing the reliability of the engine, turbocharger, or other engine components.
    Power Delivery Perfectly Optimized Throughout the Power Band:
    Aligned with the OEM strategy, the calibration is designed to offer a large flat torque plateau to provide a smooth and linear power band. Maximum torque output is achieved sooner and maintained longer which creates a broader torque plateau and greater area under the curve. This results in an improved acceleration and optimal engine operation.

    Improved Fuel Efficiency:
    Optimized timing and injection under cruising condition for an improved fuel efficiency.

    Speed Governor Removed:
    Vehicle speed limiter within ECU is removed. (If automatic, subject to transmission rotational speed limit)

    Ignition Timing Precisely Calibrated for Higher Octane Fuel:
    Engine calibration optimized to take advantage of higher fuel quality to extract maximum energy from the combustion. Therefore, when using a higher octane fuel, more power and better fuel efficiency will be achieved.

    OEM IS20 Turbo Upgrade Calibration:
    With maximum turbocharger efficiency reached with Stage 1, Stage 1+ and Stage 2, Unitronic developed a unique solution to bridge the gap between Stage 2 and Stage 2+ (IS38) turbo upgrade. This results in the use of a factory IHI IS20 turbocharger, from a MK7 GTI, as a complete bolt-on solution producing a power increase of 44hp and 19lb-ft tq over the Stage 2 output, using the OEM turbocharger (IS12).

    Full Staged Software Suite
    Includes all Stage 2 tune variants and all lower software stages as well.

    Required Hardware

    • Carbon Fiber Intake For MK7 GTI | MK7 R | 8V A3 | 8V S3 | MK3 TT
    • Intercooler Upgrade Kit for 1.8 and 2.0 TSI Gen3 MQB and 8Y S3 by Unitronic
    • MQB Turbo Inlet Elbow
    • Unitronic Performance Downpipe 1.8 TSI MQB EA888.3 AWD
    • Unitronic Performance Downpipe 1.8 TSI MQB EA888.3 FWD
    • IS20 Turbo Upgrade (GTI/A3 2.0 TSI)
    • *Unitronic cannot guarantee results for Clients using third-party hardware and results may vary as a result. Post-sale technical support can not be provided by Unitronic or its affiliates for Clients using third-party hardware.

    Recommended Hardware

    • Carbon Fiber Intake System With Air Duct For 1.8/2.0 TSI Gen3 MQB
    • Charge Pipe Upgrade Kit For MQB
    • Intercooler Upgrade Kit for 1.8 and 2.0 TSI Gen3 MQB and 8Y S3 by Unitronic

    Description

    Unitronic is proud to introduce its Stage 2+ IS38 ECU Performance Software for the 1.8TSI EA888 engines found in the MK7 Golf, Sportwagen, Alltrack and some 8V A3.

    Massive gains of +182HP/+139LB-FT over VW’s advertised output can be obtained with a Genuine IS38 Turbocharger, Unitronic Downpipe, Turbo Inlet Elbow, Carbon Fiber Intake System with Air Duct, and Intercooler Upgrade for a total engine output of 352HP / 324 LB-FT TQ.

    Not available for Automatic Transmission (09G/09S) equipped models. DSG equipped models require Unitronic Stage 2 DSG Performance Software.
    Subject to ECU Box code availability.

    Features ( ECU Stage 2 IS38 )

    Engineered with Strict Industry Standards:
    With over 10 years of experience in Bosch and Siemens engine management calibration, Unitronic is able to utilized its industry leading tools and equipment to assure an optimal calibration; delivering maximum performance, while maintaining complete OEM-like reliability and drivability.

    Extensively Tested Under Various Driving Conditions:
    Development begins using its in-house engine dyno housed in an environmentally controlled cell; closely monitoring a plethora of operational data, utilizing industry leading calibration tools and resources. Additional validation and results comparison are completed using its in-house Maha Chassis dyno as a second step of product development. Beta calibrations are then tested in race and street scenarios, using multiple cars throughout the world under various driving conditions. This engine calibration strategy ensures Unitronic Performance Software delivers maximum performance, OEM-like drivability and reliability anywhere in the world. Unitronic Performance Software is only released to its Clients once development is thoroughly completed in accordance to Unitronic’s strict standards.

    Factory Safety Limiters Retained:
    OEM “fail safes” are retained within the ECU calibration. Close monitoring of all operation parameters ensures that engine operation stays within factory components limits, resulting in an OEM-like drivability and reliability.

    Engine Temperature Protection (Rev Limit based on Engine Coolant Temperature):
    Engine speed limit protection active under warm-up to prevent potential damage when coolant temperature is not within operation range.

    Optimized Responsiveness and Drivability:
    Professionally calibrated to improve engine response and reduce drive-by-wire lag. Optimized torque curve for more low end torque and faster turbo spool.

    Optimized Smoothness and Driving Comfort:
    Due to the large flat torque curve, the calibration offers a smooth operation under normal and hard acceleration. This results in linear acceleration with constant torque without low end torque peak that will cause loss of traction and uncontrollable power surge, at the expense of high engine speed power.

    Optimized Maximum Output:
    Unitronic development team delivers the maximum power output while staying within the operational limits of the factory components used. Specifically, this results in the highest engine performance without sacrificing the reliability of the engine, turbocharger, or other engine components.

    Power Delivery Perfectly Optimized Throughout the Power Band:
    Aligned with the OEM strategy, the calibration is designed to offer a large flat torque plateau to provide a smooth and linear power band. Maximum torque output is achieved sooner and maintained longer which creates a broader torque plateau and greater area under the curve. This results in an improved acceleration and optimal engine operation.

    Improved Fuel Efficiency:
    Optimized timing and injection under cruising condition for an improved fuel efficiency.

    Speed Governor Removed:
    Vehicle speed limiter within ECU is removed. (If automatic, subject to transmission rotational speed limit)

    Ignition Timing Precisely Calibrated for Higher Octane Fuel:
    Engine calibration optimized to take advantage of higher fuel quality to extract maximum energy from the combustion. Therefore, when using a higher octane fuel, more power and better fuel efficiency will be achieved.

    Full Staged Software Suite

    • Includes all Stage 2+ tune variants and all lower software stages as well.

    Required Hardware

    • 1.8TSI GEN3 MQB IHI IS38 Turbo Upgrade (Golf R/S3) by Unitronic
    • Carbon Fiber Intake System With Air Duct For 1.8/2.0 TSI Gen3 MQB
    • Intercooler Upgrade Kit for 1.8 and 2.0 TSI Gen3 MQB and 8Y S3 by Unitronic
    • MQB Turbo Inlet Elbow
    • Unitronic Performance Downpipe 1.8 TSI MQB EA888.3 AWD
    • Unitronic Performance Downpipe 1.8 TSI MQB EA888.3 FWD
    • IS38 Turbo Upgrade (Golf R/S3 2.0 TSI)
    • *Unitronic cannot guarantee results for Clients using third-party hardware and results may vary as a result. Post-sale technical support can not be provided by Unitronic or its affiliates for Clients using third-party hardware.

    Recommended Hardware

    • Charge Pipe Upgrade Kit For MQB

    [[ loading ]]
    MakeModelYearEngine

    RETURN & EXCHANGE ( Last Updated March 8th 2021)

    Return Policy:

    To initiate the return process, please call or email Strictly European Motors Ltd. We will provide you with a Return Merchandise Authorization number. The RMA number, receipt/Proof of Purchase, and item + original packaging must be included for a return to be valid.

    Return Address

    Strictly European Motors Ltd

    130 Lepage Crt Unit 16

    Toronto, Ontario

    M3J-3J1

    Canada

    All returns are subject to a 20% restocking fee. All items being returned must be in new, undamaged condition, and in the original packaging. Any item that has been installed on a vehicle will not be eligible for return. Customers have a 30 day (excludes Unitronic products [15 days] no exceptions ) window from the time of the original shipping date to return an item. Shipping costs are the sole responsibility of the customer. Strictly European Motors Ltd is not responsible for the shipping costs of returns, nor will the initial shipping cost of the item(s) be refunded or reimbursed upon return of said item. All items shipped with FREE shipping will still be subject to actual shipping charges being non-refundable.

    We highly recommend insuring items for return, but that is left to the discretion of the customer. Strictly European Motors Ltd is not responsible for any lost, stolen or damaged items. Items can either be exchanged or refunded to the original payment method depending on preference. Exchanges are subject to product availability.

    Certain items are non-returnable this includes but is not limited to: special order items, all Uni connect cables, electronic items (items with electrical components), tools, fluids of any kind, cleaning products and on sale/clearance item. These items cannot be returned for a refund or store credit. Under no circumstances will Strictly European Motors Ltd reimburse or pay for any parts/labor charges related to an incorrect, faulty, or defective product.

    Please note, when ordering an item, it is incumbent upon the customer to choose the correct item or product for their vehicle. Please ensure you are providing the correct make, model, and year, as well as engine and drivetrain layout when ordering. Mix-ups happen, and Strictly European Motors Ltd prides itself on helping and providing information to customers when they occur. If you are unsure of whether an item will fit your vehicle, please contact Strictly European Motors Ltd and speak to a representative.

    We are aware that glitches occur, and sometimes the wrong item is sent. If this occurs, contact us immediately to notify us of the discrepancy. We will work with you to sort out the issue.

    Returned and Refused Shipments

    All shipments refused by the receiver or returned undeliverable will be processed as a return according to Strictly European Motors Ltd return policy.

    Miss-Shipped Orders

    Strictly European Motors Ltd tries to ensure all customers receive the parts they have ordered, however mistakes do happen. In the event that Strictly European Motors Ltd ships the incorrect item, Strictly European Motors Ltd will provide a return label so the incorrect item can be returned. A return label will only be issued to the address the item was originally shipped to. Strictly European Motors Ltd will only send out the correct item once the incorrect item is received in the original packaging. Replacement items will only be shipped to the address on the original order. Strictly European Motors Ltd will not provide a refund or store credit for mis-shipped items. All mis-shipped items should be claimed within 3 days of receiving shipment. All mis-shipped items that were attempted to be installed or are not in the original package will be refused.

    SHIPPING DETAILS

    Shipping Policy:

    Strictly European Motors Ltd typically ship all in-stock orders within 1-2 business days of your order being placed. All orders placed on a weekend or holiday closure will be processed the next business day. In the event of a back-order or out of stock item we will do our best to contact you by phone or email with an estimated ship date for the item(s) you ordered. Some items are noted as special-order or require lead-times, so please keep that in mind when ordering such products. To ensure the fastest delivery of your order, some items may be drop-shipped to you from a third party, or shipped in a separate package.

    Strictly European Motors Ltd uses Canada Post, UPS and Fed Ex as our primary shipping companies. Strictly European Motors Ltd will make every attempt to ship your order using the method you selected at checkout but in some cases we will ship with an alternative shipping method without notice. Strictly European Motors Ltd is not responsible for any delays caused by any shipping company.

    Strictly European Motors Ltd webstore estimates shipping costs to the best of its ability using standard shipping company data bases and dimension data that is entered. All shipping costs are not final and Strictly European Motors Ltd has the right to change shipping cost. Once recalculations of shipping costs are made, a notification will be sent by phone or email. Once recalculated and shipping costs are paid, and only then will Strictly European Motors Ltd ship out your order.

    All quoted shipping charges include insurance, handling, and shipping. If your email is provided to us, you will receive your tracking information.

    Some items are classified by both carriers as over-sized items. Examples of such items would include, but are not limited to; exhausts, brake kits, suspension packages, etc. As such, extra charges may apply. You will be provided with a quote at the time of your time of purchase. Spot quotes on shipping are valid for 15 days from the initial quote.

    Free Shipping Policy

    Free Shipping Policy Canada

    Free shipping is for Canada only and covers all items that are listed as Free shipping with a Canadian Flag Icon. If a Free shipping item is purchased with a non-free shipping item or an over-sized item, the shipping cost will be calculated at check out for non-free shipping items. All items shipped with FREE shipping will still be subject to actual shipping charges if returned. Also, all orders of $399.99 or higher value are eligible for free shipping in Canada. Certain items are excluded from free shipping all together, which may include over-sized or overweight items, including specifically Brake Rotors, Coilovers, among others.

    Free Shipping Policy USA

    Free shipping is for USA only and covers all items that are listed as Free shipping with an American Flag Icon. If a Free shipping item is purchased with a non-free shipping item or an over-sized item, the shipping cost will be calculated at check out for non-free shipping items. All items shipped with FREE shipping will still be subject to actual shipping charges if returned. Certain items are excluded from free shipping all together, which may include over-sized or overweight items, including specifically Brake Rotors, Coilovers, among others. Some items that originate in the United States will be drop shipped from the manufacturer to American destinations. Duties and excise taxes are not included in free shipping, please refer to our "All International Shipments" policy for more information.

    All International Shipments:

    Customers are responsible for any and all duty or applicable taxes imposed by their respective countries/provinces/states. Take note that Customs may delay shipments, and such delays are outside of the realm of our control. Please inspect your package upon arrival for damage, and if noticed, contact the carrier immediately. You have 3 days after receiving your item to report missing or damaged product. Strictly European Motors Ltd is not responsible for lost, stolen or damaged goods.

    Have Questions?Ask An Expert
    The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.